Using The Pool Equipment
Using The Panel On The Wall Under Freddy Kreuger!
Be CAREFUL to avoid
Freddy and whatever you do...Don't... Fall...Asleep....
!
Back on topic: Press "SPA" to switch to spa mode. It'll
heat up at a rate of about 1 degree every 1-3 minutes
depending on the weather. The hot tub will stay on for
about 2 hours and can then be re-started but you may
want to briefly re-switch back to pool for 5 minutes and
then to spa after 40-50 minutes if the water is getting
low. This will enable the spa to re-fill albeit with
cooler water you should be able to then rapidly re-heat
in spa mode. To add bubbles, light up the "AIR
BLOWER" button. You can switch back to pool mode with
the "POOL" button. Please remember that if you're
heating the pool, the heat will switch over to the SPA
while in use. During especially cold weather, lots of
spa use may cause the pool to lose quite a bit of heat.
The "SLIDE" button of course, toggles the waterslide on
and off and "LIGHTS" manually controls the pool/spa
lighting.
< Click To Return To The Main Menu









